BMSGJ - BURKEPOXY MV BASE

  • MSDS: BMSGJ
  • Manufacturer: BURKE CO
  • Product Name: BURKEPOXY MV BASE
  • National Stock Number: 8040-00N028210
Product Identification

Product ID:BURKEPOXY MV BASE
MSDS Date:12/01/1989
FSC:8040
NIIN:00N028210
Kit Part:Y
MSDS Number: BMSGJ

Responsible Party
BURKE CO
2655 CAMPUS DR
SAN MATEO, CA 94402
US

Emergency Phone: 213-834-3401/415-349-7600

Info Phone: 213-834-3401/415-349-7600

Preparer: HOWARD UYENO

Cage: 0KM49

Contractor
BURKE CO
SAN MATEO, CA 94403 US

Telephone: 415-349-7600

Cage: 0KM49

Ingredients

DGBA EPOXY RESINS; (BISPHENOL A DIGLYCIDYL ETHER RESIN)

CAS: 25068-38-6

RTECS: SL6475000


ALPHATIC MONOGLYCIDYL ETHER; (ALIPHATIC GLYCIDYL ETHER)

CAS: 68609-96-1


PROPANE, 1-CHLORO-2,3-EPOXY-; (EPICHLOROHYDRIN)

CAS: 106-89-8

RTECS: TX4900000

OSHA PEL S, 5 PPM

ACGIH TLV: S, 2 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN IRRITATION. CHRONIC: SKIN
IRRITATION.
Explanation of Carcinogenicity:EPICHLOROHYDRIN: GROUP 2 (NTP), GROUP 2A
(IARC).
Effects of Overexposure:SKIN IRRITATION, SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:SKIN IRRITATION.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR AND ADMINISTER OXYGEN IF
NECESSARY. EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
AND GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. LAUNDER
CLOTHING BEFO RE RE-USE. INGEST: DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION IMMEDIATELY.

Fire Fighting

Flash Point Method:PMCC
Flash Point:245F,118C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER MIST.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . REMOVE ALL IGNITION SOURCES.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
BUILD-UP OF PRESSURE WHEN EXPOSED TO EXTREME HEAT).

Accidental Release

Spill Release Procedures:SALVAGE FREE LIQUID WITH SHOVEL. BROADCAST
ABSORBENT MATERIAL AND PLACE IN A SEALED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE WITH
ADEQUATE VENTILATION.
Other Precautions:PREVENT ALL SKIN AND EYE CONTACT. AVOID BREATHING
VAPORS. RE-SEAL PARTLY USED CONTAINERS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION IS
REQUIRED.
Ventilation:LOCAL EXHAUST AND MECHANICAL IS RECOMMENDED.
Protective Gloves:NEOPRENE OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FURTHER SAFETY EQUIPMENT NECESSARY TO
PREVENT CONTACT WITH MATERIAL.
Work Hygienic Practices:WASH HANDS BEFORE HANDLING FOOD.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:C2
Boiling Pt:B.P. Text:540F,282C
Vapor Pres:<1 @ 20C
Vapor Density:HVR/AIR
Spec Gravity:1.35 (H*2O=1)
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:WHITE MIXTURE; MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, MINERAL ACIDS (E.G.
SULFURIC ACID, HYDROCHLORIC ACID).
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE I/A/W FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.